The chassis base of sand table model is also a section that can not be ignored in the whole process of sand table model making. It is the display cornerstone of a high-quality sand table model. What are the contents of sand table model chassis production? Let's take a look at the vision model.
What are the contents of making sand table model chassis:
1. Make a label to mark the scale, north arrow, project name, production team or author of the model in the form of a label. Sometimes there may be additional commentary or key instructions. It should be noted that all words or symbols appearing on the model chassis are part of the whole model, and their accuracy and placement position should be taken into account.
2. The specification and style of the chassis are determined. The size of the chassis is not determined arbitrarily, but needs to be designed according to the overall size of the main body of the model and the environment. Generally, in order to make the main body of the model stand out from the whole and make the composition beautiful, there will be a certain interval between the main body of the building in the model, the surrounding environment and the edge of the chassis. The size of the interval distance can be determined according to the specific model.
Sometimes, leave a short interval between the main body of the model, the surrounding environment and the edge of the chassis to reflect the integrity of the composition. Sometimes, the edges of the building body and the chassis are widely spaced to represent the buildings in the site or deliberately highlight the building body.
3. Elevation diagram of chassis during model making, when the altitude indicated by the chassis is usually the structure below + 0.00m ↓, the building and environmental model on the chassis shall be made according to the normal elevation. When encountering the structure below the ground, the corresponding position of the chassis shall be cut, and the content below the ground shall be fixed and pasted with the chassis to represent the content below the ground.
4. To understand the weight of main materials, we first need to understand and estimate the approximate weight of materials used in the main body of the building and the surrounding environment, so as to determine what kind of materials and processes are selected to make the chassis.
The above content is an introduction to the production of sand table model chassis. Different sand table model chassis have different raw materials, which are mainly solid and lightweight. At present, the wood commonly used in manufacturing chassis is mostly light board, plywood, multilayer board, etc.