您好,欢迎光临山东视野模型有限公司官网!

首页 - 新闻资讯 >

房地产沙盘模型的布局和制作流程步骤!

时间:2020-06-22
阅读量:
  沙盘有很多种,有军用的,有房地产用的,还有城建用的。今天潍坊模型公司这里以房地产沙盘模型为例,简要地介绍一下其制作流程。
  There are many kinds of sand table, including military, real estate and urban construction. Today Weifang model company takes real estate sand table model as an example to briefly introduce its production process.
  1沙盘台子
  1 sand table
  首先,要将顾客交付持房地产平面布置图和施工图纸研究透,组装部根据平面布置图及沙盘的比例来制作沙盘的台子。台子一般做成台球桌状,如果是大型的沙盘,要做成几个小台子,拼到一起。
  First of all, the customer should be delivered to hold the real estate layout plan and construction drawings for thorough study. The assembly department should make the sand table according to the layout plan and the proportion of the sand table. The table is generally made into a billiard table. If it is a large sand table, it should be made into several small tables and put together.
  2PVC板喷漆
  2pvc board painting
  喷漆部根据楼房图纸的设色调出相应颜色的油漆来,喷在相应的PVC板上,送到设计部进行雕刻。
  According to the color setting of the building drawing, the painting department will call out the corresponding color paint, spray it on the corresponding PVC board, and send it to the design department for carving.
  3雕刻楼房部件
  3 carving building parts
  设计部根据施工图按比例设计出楼房的结构,并在电脑上分解成不同的板块,按施工的要求设计出墙面的花纹、房顶的瓦棱、窗子等,然后发送到雕刻机在PVC板上雕刻出楼房的板块,送到制作部制作。
  The design department designs the structure of the building in proportion according to the construction drawings, decomposes it into different plates on the computer, designs the pattern of the wall, the tile edge of the roof, the window, etc. according to the construction requirements, and then sends it to the carving machine to carve the plate of the building on the PVC plate, and sends it to the production department for production.
              潍坊模型公司
  4组合楼房
  4 composite building
  制作部根据设计部送来的楼房板块,根据说明和粘合方式,用三氯甲烷将PVC板块粘合成楼房的大致形状。窗子的形状是直接雕刻在PVC板上的,用薄而透明的有机玻璃板粘在内部窗子的位置作为窗子的玻璃。
  According to the building plate sent by the design department, the production department uses trichloromethane to glue the PVC plate to the approximate shape of the building according to the instructions and bonding methods. The shape of the window is directly carved on the PVC board, and the thin and transparent plexiglass board is used as the glass of the window at the position of the internal window.
  5置景
  5 setting
  置景部根据组装部所作的台子和平面布置图,在台子上划分出平面布局,用绿色绒面墙纸作为草地粘在绿化区,大孔海绵浸上绿色油漆晾干,裁成长条作为绿化带粘在小灌木区。
  According to the platform and layout plan made by the assembly department, the Landscaping Department divides the plane layout on the platform. The Green Suede wallpaper is used as the grass to stick to the green area, the big hole sponge is soaked with green paint to dry, and the long strip is cut as the green belt to stick to the small shrub area.
  如果布局中有水和湖泊,可以用波纹面的有机玻璃板,背面喷湖蓝色漆,裁成河流或湖泊的形状放在相应的位置。若是有高地,可将有机玻璃板或PVC板层层堆积并修整成形,再抹上涂料填充缝隙,晾干后覆上草地。用灰色的背胶纸粘成公路,用白色背胶纸刻成公路线标粘在上面。
  If there are water and lakes in the layout, you can use the plexiglass plate with corrugated surface, spray the lake blue paint on the back, cut it into the shape of a river or lake and put it in the corresponding position. If there is a high ground, the plexiglass plate or PVC plate can be piled up layer by layer, trimmed and shaped, then coated with paint to fill the gap, dried and covered with grass. The road is made of gray adhesive paper, and the road line mark is made of white adhesive paper.
  6制作配件
  6 making accessories
  制作部将铜丝电线剥皮,将铜丝拧成树干的形状,喷上漆。普通海绵浸漆,晾干后粉碎,将树干的枝丫浸胶,粘上碎海绵,做成树。若是绿树,海绵可浸绿漆,若是秋天的树,可浸橙色漆。
  The production department will peel the copper wire, screw the copper wire into the shape of the trunk, and spray paint. The common sponge is soaked with paint, dried and crushed, and the branches of the trunk are soaked with glue, then the broken sponge is stuck to make the tree. If it is a green tree, sponge can be soaked in green paint. If it is an autumn tree, it can be soaked in orange paint.
  柳树可用0.2mm的漆包线拧成树干与树枝,然后在树枝上粘上绿色绒线末。松树是将粗鱼线剪成细段,用夹子夹住,再将两根0.5mm的漆包线夹住绞动,松开夹子,就成了松树的形状,修剪一下,粘上绿色绒线末即可。其它的花草可以用干花剪下来染色来制作。用医用棉签或牙签做成路灯。泡沫塑料可以用刀片雕刻成假山石的形状,喷上漆。
  Willow can be screwed into trunk and branch with 0.2mm enameled wire, and then green lint is stuck on the branch. The pine tree is to cut the thick fishing line into thin sections, clamp it with clamps, then clamp and twist two 0.5mm enameled wires, loosen the clamps, and it will become the shape of the pine tree. Trim it, and stick on the green lint. Other flowers and plants can be made by cutting and dyeing dry flowers. Use medical cotton or toothpick to make street lamp. The foam plastic can be carved into the shape of fake mountain stone and painted with paint.
  7整体组合
  7 overall combination
  置景部将制作部送来的花草树木及楼房按布置粘在相应的地方。组装部根据每栋楼房所在的位置,打孔并装上小彩灯,使楼房模型内部能发光,如同开灯的效果,并接好线路。
  The Landscaping Department will stick the flowers, trees and buildings sent by the production department to the corresponding places according to the layout. According to the location of each building, the assembly department shall drill holes and install small color lights to make the interior of the building model glow, just like the effect of turning on the lights, and connect the lines.
  设计部雕刻出楼房与路的标识、文字,做成小标牌,粘在相应的位置。
  The design department carves out the signs and words of buildings and roads, makes small signs and sticks them to corresponding positions.
  以上是关于房地产沙盘模型的布局制作流程的简单介绍,由潍坊模型公司提供,想要了解更多内容欢迎点击http://www.jnsymx.com网站。
  The above is a brief introduction to the layout and production process of the real estate sand table model, which is provided by Weifang model company. For more information, please click http://www.jnsymx.com Website.