济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    建筑模型的木头的处理方式都有哪些?
    2020-1-14 15:26:57 来源:http://www.jnsymx.com

    木材是建造沙盘模型的常用材料,但一般在制作模型之前,木材都要采取一些处理措施。如果需要切割、打磨、拼接等。只有处理好材料,才能使建筑模型达到预期的效果。让我们来看看板子的处理过程。

      Wood is a common material to build sand table model, but generally before making the model, some measures should be taken to deal with the wood. If cutting, grinding, splicing, etc. is required. Only when the materials are properly treated can the building model achieve the expected effect. Let's take a look at the processing of the board.

      如何处理用于建筑模型的木板:

      How to deal with boards for building models:

      1. 可能的弯曲:木材应弯曲在前面和后面的椭圆形翼尖或薄壳机身。主要方法有:火烤、煮、冷弯。可以根据自己的喜好使用。

      1. Possible bending: the wood should be bent at the front and back of the elliptical wingtip or thin shell fuselage. The main methods are: roasting, boiling and bending. It can be used according to your own preference.

      2. 可能的拼接:用于木片的加宽和加长。剪接后注意保持平整。

      2. Possible splicing: used for wood chip widening and lengthening. Pay attention to keep flat after splicing.

      3、需要刨平:由于现在多用于生产材料刨平,一般很少刨木、木片,除非自己生产或活动用特殊规格的材料。现在,在制作较大的模型体或仿真模型时,为了提高工作效率和生产质量,有必要采用平面法对曲面进行修整。

    潍坊模型公司

      3. Need to be planed: because now it is mostly used for the production of material planing, generally there is little planing of wood and wood chips, except for materials of special specifications used for self production or activities. Now, in order to improve work efficiency and production quality, it is necessary to use the plane method to trim the surface when making large model or simulation model.

      4、需裁切:将木屑多余部分裁切下来,或从木屑中裁切出所需的木材及前后边缘、腹板、翼肋等。切割时,注意木纹的方向,力先轻后重逐渐增加力,直到切割时,不要用刀切割,尤其在切割圆弧时更要注意。

      4. To be cut: cut off the surplus wood chips, or cut out the required wood, front and rear edges, webs, ribs, etc. from the wood chips. When cutting, pay attention to the direction of the wood grain, and gradually increase the force after the force is light, until cutting, do not use a knife to cut, especially when cutting the arc.

      5、需要打磨:打磨时向木纹方向用力,先要均匀重然后轻,并选择合适的砂纸进行打磨。水砂纸常用于抛光前。

      5. Need to be polished: when grinding, use force in the direction of wood grain, first evenly heavy and then light, and select appropriate sandpaper for grinding. Water sandpaper is often used before polishing.

      事实上,木质材料有很多细分,不同的建筑模型在材料选择上可能会有一些细微的差异。我们建议根据自己的建筑风格特点,适当选择材料。另外,其实在制作木质建筑造型时,也可以适当添加一些辅助材料制作,如有机玻璃、水晶玻璃等,来衬托其独特的魅力,使其更有灵感。

      In fact, wood materials have many subdivisions, and different building models may have some subtle differences in material selection. We suggest that we should choose appropriate materials according to our own architectural style. In addition, in fact, when making wood building modeling, you can also add some auxiliary materials, such as plexiglass, crystal glass, etc., to set off its unique charm and make it more inspired.

      以上就是潍坊模型公司对制作建筑模型的木头的处理方式都有哪些的详细介绍,想要了解更多请点击官网http://www.jnsymx.com

      The above is a detailed introduction of Weifang model company's wood processing methods for building models. To learn more, please click http://www.jnsymx.com


    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com