济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    建筑模型中不同类型道路的制作方法有什么不同?
    2019-8-27 17:17:41 来源:http://www.jnsymx.com

    道路交通是建筑模型中的重要组成部分,不同的济南建筑模型中的道路类型会也有所不同。即便是同一个建筑模型,可能也会存在几种类型的道路。下面聊城模型公司就来给大家说说济南建筑模型中不同道路的制作方法是什么样的。

    Road traffic is an important part of the building model, and the road types in different Jinan building models will also be different. Even with the same building model, there may be several types of roads. Next, Liaocheng Model Company will tell you how to make different roads in Jinan Architectural Model.

    一、铁路的制作方法:窗纱是做铁路的常用材料。取不能抽动纱线的窗纱一块,染成银白色或黑色,裁成小条贴在适当的位置,就成了铁路。如果比例尺很大可将有机玻璃片裁成薄的细条制作,也可裁赛璐珞板制作。

    1. Railway production method: window screen is a common material for railway. Take a piece of window screen that can't pull yarn, dye it silver-white or black, cut it into strips and stick it in the right place, and it becomes a railway. If the scale is very large, the PMMA sheet can be cut into thin strips to make, or the celluloid board can be made.

    二、城市道路的制作方法:城市道路很复杂,有主干道、支干道、街巷道等,所以在表示方法上也不应一样,以下介绍几种表示方法。

    2. The method of making urban roads: Urban roads are very complex, including trunk roads, branch roads, streets and lanes, so the expressing methods should not be the same. Here are some expressing methods.

    1)主干、次干道路:将白色0.5mm厚的赛璐珞片裁成宽1mm以下的细条粘在道路上,给人一种边石线的感觉。

    聊城模型公司作品

    1) Main and secondary roads: white 0.5mm thick Celluloid pieces are cut into thin strips less than 1mm wide and glued to the road, giving a feeling of edge stone line.

    2)街巷小路:用植绒纸或薄有机玻璃片将不是道路的部分垫起来,这样自然产生一高一低之差。道路边线便十分清楚地显示出来。

    2) Street and lane: Use flocking paper or thin plexiglass sheet to pad the part that is not the road, which naturally produces the difference between high and low. The roadside is clearly shown.

    3)用即时贴裁成细条贴在边石线上,弧线部分用白水粉画出来。

    3) Use instant stickers to cut into thin strips and stick them on the edge stone line. The arc part is painted with white water powder.

    4)全部用白水粉画出街巷边线。

    4) Draw all the sidelines of streets and lanes with white water powder.

    三、乡村道路的制作方法:乡村道路可用60~100号黄色砂纸按图纸的形状剪成。在往底台上粘时要注意砂纸的接头, 要对好粘牢防止翘起。用透明胶纸在背面将接头粘牢后再粘到底台上比较好,这样才能保证接头 部分不裂缝、不翘起。

    3. The method of making rural roads: The rural roads can be cut with yellow sandpaper No. 60-100 according to the shape of the drawings. Attention should be paid to the joints of sandpaper when gluing to the base, and good adhesion should be made to prevent warping. It is better to use transparent adhesive paper to stick the joint on the back and then to the bottom of the platform, so as to ensure that the joint part does not crack and heave.

    今天给大家介绍的精彩内容到这里就结束了,小编在这里十分感谢大家的阅读,如果大家想要了解更多的相关咨询,可以把我们的网址:http://www.jnsymx.com添加到收藏,或者搜索关键词:聊城模型公司,也可以找到我们。谢谢大家的支持!

    Today's wonderful content for you is over. The edition here is very grateful for your reading. If you want to know more about the relevant consultation, you can add our website: http://www.jnsymx.com to the collection, or search keywords: Liaocheng Model Company, you can also find us. Thank you for your support!


    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com