济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    制作建筑模型的木板有哪些的处理工艺?
    2019-8-22 18:51:58 来源:http://www.jnsymx.com

    木板是制作沙盘建筑模型的常用材料,但是一般在制作模型之前,木板是要采取一些处理措施的。如可能会需要裁剪、打磨、拼接等等。只有处理好材料,才可能会制作出符合预期效果的建筑模型。下面我们就和聊城模型公司一起来看看木板的处理工艺。

    Wood boards are common materials for making sand table building models, but generally before making models, wood boards need to take some treatment measures. It may require cutting, polishing, splicing and so on. Only when the materials are properly processed can the expected architectural model be produced. Next, we will look at the wood processing technology with Liaocheng Model Company.

    1、可能要进行弯曲:在制作椭圆翼尖的前后或卷制薄壳机身时,都要将木料进行弯曲。主要方法有:火烤、水煮、冷弯。可根据自己的喜好习惯使用。

    1. Bending may be required: Wood should be bent before and after the elliptical wing tip is made or when the thin shell fuselage is rolled. The main methods are: roasting, boiling and cold bending. Can be used according to their own preferences and habits.

    2、可能需要拼接:用于木片的加宽和加长,注意拼接后要保持平整,加厚处理时要注意年轮的方向,使拼接后不宜弯曲变形。

    2. Stitching may be necessary: for the widening and lengthening of wood chips, attention should be paid to the smoothness after stitching, and attention should be paid to the direction of annual rings when thickening, so that bending deformation is not suitable after stitching.

    聊城模型公司

    3、需要进行刨削:因现在制作材料多代为刨削,一般很少刨削木条、木片,除非自己制作或活动用较特殊规格的材料。现多用在制作遥控类较大模型机身或仿真模型时,需要用刨削的方法修整表面,提高工作效率和制作质量。

    3. Planing is needed: because most of the materials produced today are planing, few wood bars and chips are planned unless they are made by themselves or use materials with special specifications for activities. At present, it is mostly used to make the fuselage or simulation model of the larger remote control model. It is necessary to use planed method to repair the surface to improve work efficiency and production quality.

    4、需要进行裁割:将木片多余的部分裁去,或是从木片上截取所需的木条和前后缘、腹板、翼肋等。裁割时注意木纹方向,用力要先轻后重逐渐加力直至裁断,不可一刀裁,尤其是裁弧线时更要注意。

    4. Need to be cut: cut the excess parts of the wood chips, or cut the required wood strips and front and rear edges, webs, wing ribs from the wood chips. When cutting, we should pay attention to the direction of wood grain. We should put more stress on it first, then gradually until cutting. We should not cut it with one knife, especially when cutting arc.

    5、需要进行打磨:打磨时要顺木纹方向,用力要均匀先重后轻,并选择合适的砂纸进行打磨。抛光前常用水砂纸打磨。

    5. It needs to be polished: when polishing, it should follow the direction of the wood grain, exert uniform force first, then light, and select the appropriate sandpaper for polishing. Water sandpaper is often used before polishing.

    以上精彩内容由聊城模型公司的小编整理提供,如果您还有更多想要了解的,欢迎咨询我们官网的客服人员:http://www.jnsymx.com!我们将给您做出满意的回复!谢谢大家的支持!

    The above wonderful content is provided by Liaocheng Model Company. If you have more to learn, please consult our customer service staff on the official website: http://www.jnsymx.com! We will give you a satisfactory reply! Thank you for your support!


    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com