济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    楼盘模型的制作过程!
    2019-8-16 18:29:24 来源:http://www.jnsymx.com
    现在的房地产差不多都离开一件东西,那就是沙盘模型!沙盘模型可以帮助人们快速直接的了解地产的周边设施、环境和大致地理位置等一些情况!下面聊城模型公司的小编就给大家介绍一下楼盘模型的制作过程!
    Now almost all the real estate has left one thing, that is the sand table model! Sand table model can help people quickly and directly understand the surrounding facilities, environment and general geographical location of real estate. Next, the editor of Liaocheng Model Company will introduce the process of building model making.
    一、沙盘台子
    I. Sand Table
    首先,要将顾客交付持房地产平面布置图和施工图纸研究透,组装部根据平面布置图及沙盘的比例来制作沙盘的台子。台子一般做成台球桌状,如果是大型的沙盘,要做成几个小台子,拼到一起。
    Firstly, the customer should deliver and hold the real estate layout and construction drawings thoroughly. The assembly department will make the sand table according to the proportion of the layout and sand table. The table is usually made into a billiard table. If it is a large sand table, it should be made into several small tables and put together.
    二、PVC板喷漆
    II. Spraying of PVC Board
    喷漆部根据楼房图纸的设色调出相应颜色的油漆来,喷在相应的PVC板上,送到设计部进行雕刻。
    The paint department sprays the corresponding color paint according to the color of the building drawings, sprays it on the corresponding PVC board, and sends it to the design department for sculpture.
    三、雕刻楼房部件
    3. Sculpture of Building Components
    设计部根据施工图按比例设计出楼房的结构,并在电脑上分解成不同的板块,按施工的要求设计出墙面的花纹、房顶的瓦棱、窗子等,然后发送到雕刻机在PVC板上雕刻出楼房的板块,送到制作部制作。

    According to the construction drawings, the design department designed the structure of the building proportionally, and decomposed it into different plates on the computer. According to the construction requirements, the design of wall patterns, roof tiles, windows, etc. were sent to the engraving machine to engrave the building plates on the PVC board and sent to the production department for production.

    聊城模型公司的作品

    四、组合楼房
    IV. COMPOSITE BUILDINGS
    制作部根据设计部送来的楼房板块,根据说明和粘合方式,用三氯甲烷将PVC板块粘合成楼房的大致形状。窗子的形状是直接雕刻在PVC板上的,用薄而透明的有机玻璃板粘在内部窗子的位置作为窗子的玻璃。
    According to the floor slabs sent by the design department, and according to the instructions and bonding methods, the production department uses trichloromethane to bond the PVC slabs into the approximate shape of the building. The shape of the window is carved directly on the PVC board, and the position of the inner window is glued with thin and transparent plexiglass plate as the glass of the window.
    五、置景
    V. Scenery
    置景部根据组装部所作的台子和平面布置图,在台子上划分出平面布局,用绿色绒面墙纸作为草地粘在绿化区,大孔海绵浸上绿色油漆晾干,裁成长条作为绿化带粘在小灌木区。如果布局中有水和湖泊,可以用波纹面的有机玻璃板,背面喷湖蓝色漆,裁成河流或湖泊的形状放在相应的位置。若是有高地,可将有机玻璃板或PVC板层层堆积并修整成形,再抹上涂料填充缝隙,晾干后覆上草地。用灰色的背胶纸粘成公路,用白色背胶纸刻成公路线标粘在上面。
    According to the tables and layout maps made by the assembly department, the layout is divided on the tables. The Green Suede wallpaper is used as pasture to adhere to the green area, the large pore sponge is dipped in green paint to dry, and the cut strip is used as green belt to adhere to the small shrub area. If there are water and lakes in the layout, corrugated plexiglass panels can be used, and lake blue paint can be sprayed on the back, cut into the shape of rivers or lakes and put in the corresponding position. If there is a highland, the plexiglass or PVC sheets can be stacked layer by layer and trimmed to form, then coated with paint to fill the gap, after drying, covered with grass. Glue the highway with grey backing paper and carve the highway markings with white backing paper.
    六、制作配件
    VI. Making Accessories
    制作部将铜丝电线剥皮,将铜丝拧成树干的形状,喷上漆。普通海绵浸漆,晾干后粉碎,将树干的枝丫浸胶,粘上碎海绵,做成树。若是绿树,海绵可浸绿漆,若是秋天的树,可浸橙色漆。柳树可用0.2mm的漆包线拧成树干与树枝,然后在树枝上粘上绿色绒线末。松树是将粗鱼线剪成细段,用夹子夹住,再将两根0.5mm的漆包线夹住绞动,松开夹子,就成了松树的形状,修剪一下,粘上绿色绒线末即可。其它的花草可以用干花剪下来染色来制作。用医用棉签或牙签做成路灯。泡沫塑料可以用刀片雕刻成假山石的形状,喷上漆。
    The production department peels the copper wire, twists the copper wire into the shape of the tree trunk and sprays paint on it. Ordinary sponges are dipped in paint, dried and crushed. Branches of trunks are dipped in glue and bonded with crushed sponges to make trees. If it is a green tree, the sponge can be dipped in green paint, if it is an autumn tree, it can be dipped in orange paint. Willows can be twisted into trunks and branches with 0.2 mm enameled wire, and then stick green wool on the branches. Pine tree is to cut thick fishing thread into thin segments, clamp with clips, and then two 0.5mm enameled wires clamped twist, loosen the clips, it becomes the shape of pine tree, prune, stick green wool end can be. Other plants can be made by cutting and dyeing dried flowers. Street lamps are made of medical cotton swabs or toothpicks. Foam plastics can be carved into rockery shapes with blades and sprayed with paint.
    七、整体组合
    VII. Integral Combination
    置景部将制作部送来的花草树木及楼房按布置粘在相应的地方。组装部根据每栋楼房所在的位置,打孔并装上小彩灯,使楼房模型内部能发光,如同开灯的效果,并接好线路。
    The Landscape Department will stick the flowers, plants, trees and buildings sent by the production department to the corresponding places according to the layout. According to the location of each building, the assembly department punches holes and installs small color lights to make the interior of the building model glow, just like the effect of turning on the lights, and connecting the lines.
    感谢大家的阅读,今天的内容就给大家介绍到这了。聊城模型公司的小编建议大家收藏我们的官网:http://www.jnsymx.com,我们会定期发布更多的相关信息!
    Thank you for your reading, today's content will be introduced to you. The editor of Liaocheng Model Company suggests that you collect our official website: http://www.jnsymx.com. We will regularly release more relevant information!
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com