济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    建筑模型中墙体的制作的技巧!
    2019-8-10 15:03:17 来源:http://www.jnsymx.com
    建筑模型的组成多种多样,每个部分的制作都有一些特别的技巧,下面济南模型公司给大家介绍一下建筑模型中墙体的制作的技巧,希望对大家有所帮助!
    There are many kinds of building models, each part of the production has some special skills, the following Jinan Model Company to introduce to you the building model wall production skills, I hope to help you!
    建筑模型墙体的制作工艺,将比例图或纸样复制多份,作为制作细致浮雕或装饰时的根据。将四边墙的比例图剪下作为模板,稍作拼合,看看比例是否恰当。选择制作墙壁的物料,如瓦通纸,将模板放在上面,用铅笔画出轮廓,然后依轮廓剪出或切出。
    The manufacturing technology of building model wall is to duplicate multiple copies of scale drawings or patterns as the basis for making meticulous relief or decoration. Cut out the proportion diagram of the four sides wall as a template and make a slight combination to see if the proportion is appropriate. Choose materials for walls, such as tile paper, place the template on it, draw the outline with a pencil, and then cut or cut it out according to the outline.
    各种纸品用剪或切的方法均可。如要切割泡沫板,必须用刀,拉出的刀锋要比泡沫板厚至三四倍。切割时,人要站起剪,手持刀,刀刃要垂直,刀与板面要呈四十五度切入,刀锋要用劲。这样能有效地使用锋刃,而且胶面加长,产生热力摩擦,切割的泡沫板边便不易起粒或崩裂。如要用泡沫板复制人字形屋顶,除了要重复上面各项要点外,两块板也要根据屋脊的角度切割。
    All kinds of paper products can be cut or cut. If you want to cut the foam board, you must use a knife to pull out the blade to three or four times thicker than the foam board. When cutting, people should stand up and cut, hand-held knife, the blade should be vertical, the knife and the board surface should be 45 degrees cut, the blade should be vigorous. This can effectively use the sharp edge, and the rubber surface lengthens, produces the thermal friction, the cutting edge of the foam board is not easy to granulate or crack. If you want to duplicate the herringbone roof with a foam board, besides repeating the above points, the two boards should also be cut according to the angle of the ridge.

    模仿建筑物的装饰及花纹修饰。处理时,宜先做粗大的装饰,后做细部处理。精制模型时,组具必须商量工作分配,工作必须清楚,方便分步造型。因细致装饰物多是浮雕图案,故组具宜多用可塑性高的物料,如纸黏土及陶土(陶土必须烧制,如条件不许可,可用胶泥代替。胶泥的优点是本身有颜色,缺点是容易变形)。

    济南模型公司

    Imitate the decoration and decoration of buildings. When dealing with, it is advisable to do rough decoration first, and then do detailed treatment. When refining the model, the assembly must discuss the allocation of work, the work must be clear and convenient for step-by-step modeling. Because the fine decorations are mostly relief patterns, it is advisable to use more plasticity materials, such as paper clay and pottery (pottery must be fired, if conditions do not permit, can be replaced by cement). The advantage of cement is its color, but its disadvantage is easy to deform.
    如中式建筑人字形屋顶的屋脊上,常有凸起的、高翘的复杂雕塑。制作时可先绘画蓝图并剪下纸样,接着在夹卡或胶制瓦通纸上印出轮廓,再剪下纸板。不宜使用泡沫板,因为泡沫板可能太厚。这种做法只有外形,而没有精细的雕塑。组员可利用纸黏土在上面制作浮雕,用胶水或即时贴粘贴,上色后便完成。
    For example, on the roof ridge of the herringbone roof in Chinese architecture, there are often protruding and high-warped complex sculptures. When making, first draw blueprints and cut patterns, then print outlines on jackets or rubber tiles, and then cut off cardboard. Foam boards should not be used because the foam panels may be too thick. This method only has the shape, but does not have the elaborate sculpture. Team members can use paper clay to make relief on it, glue it or paste it immediately, and finish it after coloring.
    又如西式建筑物,墙壁的装饰较中式的华丽,即使一扇窗也常用厚石做窗边浮雕。制作时便需要更多纸样影印本,工作分配也要清楚。组员若遇上这类窗花边,必须先把纸样墙身的整个窗及花边剪出来,放在透明胶片上画出轮廓,剪出胶片以制作玻璃窗。再用纸样放在卡纸上印出窗栏杆,然后放在透明胶片上,这样一个有窗的组件已完成一半。再利用泡沫板切出胶粒或胶板,围在窗边造出厚石效果,然后用胶带纸或胶水粘贴好,一个具有厚石边浮雕透明窗户便大致完成。
    Like Western-style buildings, the decoration of the walls is more gorgeous than that of the Chinese style. Even a window is often relieved with thick stone. More photocopies of paper patterns are needed when making them, and the assignment of work should be clear. If the team meets this kind of window lace, they must first cut out the whole window and lace of the pattern wall, draw the outline on the transparent film, and cut out the film to make the glass window. The window railings are printed on cardboard with pattern and then placed on transparent film. Such a window assembly is half finished. Then use foam board to cut out colloidal particles or rubber sheets, build the thick stone effect around the window, and then paste them with adhesive tape or glue. A transparent window with thick stone relief will be roughly completed.
    感谢您的阅读与观看,本文的精彩内容来自:济南模型公司,我们会有更多的精彩内容继续为您呈现,详情请点击:http://www.jnsymx.com
    Thank you for your reading and watching. The wonderful content of this article comes from Jinan Model Company. We will continue to show you more wonderful content. For more details, please click: http://www.jnsymx.com.
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com