济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    园林沙盘模型的配景如何制作?
    2019-7-18 15:13:05 来源:http://www.jnsymx.com
    园林沙盘模型中,除建筑主体外,大部分都属于绿化配景范畴。园林模型配景主要是包括山、水、绿地、草坪、假山、假湖等等的模型小品布置。在制作园林沙盘模型时,配景制作是非常重要的一个组成部分,也是至关重要的一步,那么,园林沙盘模型的配景如何制作?下面就让济南模型公司来给大家做详细介绍!
    In the garden sand table model, except for the main building, most of them belong to the category of green scenery. Landscape model matching mainly includes model sketch layout of mountains, waters, green spaces, lawns, rockeries, artificial lakes, etc. In the process of making garden sand table model, landscape matching is a very important part and a crucial step. Then, how to make landscape matching of garden sand table model? Let Jinan Model Company to give you a detailed introduction!
    园林沙盘模型的配景具体制作方法:
    Specific methods for making landscape matching of garden sand table model:
    1、树木制作:制作树木的方法,首先将染好颜色的海绵或泡沫塑料撕成不规则的小块.然后将之捆绑或粘接在拧好的铁丝或树枝上,做出所需要的自然树木的造型即可。
    1. Tree making: The method of making trees is to tear colored sponges or foams into irregular pieces, then tie or glue them to twisted wires or branches to make the desired natural tree shape.
    2、绿地制作:制作绿地的方法是将筛选好的木屑粉分别染成不同明度的绿色,并将之混合,产生较为自然的绿地效果,将乳胶均匀涂抹在模型底板绿地区域,均匀撒上混合好的木屑粉,等乳胶稍干后,喷洒发胶,使之彻底固定。

    2. Green space production: The method of making green space is to dye the selected wood dust powder into green with different brightness and mix it to produce a more natural green space effect. The latex is evenly applied to the green space area of the model floor, evenly sprayed with mixed wood dust powder, and sprayed with hair gel after the latex dries slightly, so as to make it completely fixed. This is the case.

    济南模型公司

    3、水面制作:首先用毛刷把调制好的蓝绿色刷在透明或半透明的有机玻璃板的背面,然后将其正面向上放置到模型底板上,再用假山、碎石和道路等围出不规则的水面区域。这里需要注意的是,有机玻璃板的厚度不宜过厚。
    3. Water Surface Production: First, the blue-green brush is placed on the back of the transparent or translucent PMMA board with a brush, then the front is placed on the bottom of the model, and then the irregular water surface area is surrounded by rockeries, gravel and roads. It should be noted here that the thickness of plexiglass plate should not be too thick.
    4、假山小品制作:制作假山可以选用泡沫塑料.纸黏土、苯板、石子等材料.用壁纸刀、锉刀、砂纸等工具修剪成所需要的假山造型;根据需要上好颜色或撒上草地粉即可。
    4. Crafts making: Foam plastic, paper clay, benzol board, stone and other materials can be used to make rockeries. Wallpaper knife, file, sandpaper and other tools can be used to trim the required rockeries; good color or pasture powder can be sprinkled as needed.
    5、道路制作:制作假山,可以选用泡沫塑料.纸黏土、苯板、石子等材料,用壁纸刀、锉刀、砂纸等工具修剪成所需要的假山造型;根据需要上好颜色或撒上草地粉即可。
    5. Road making: Foam plastic, paper clay, benzol board, stone and other materials can be used to make rockery. Wallpaper knife, file, sandpaper and other tools can be used to trim the required rockery shape; good color or pasture powder can be sprayed according to needs.
    感谢您的阅读与观看,本文的精彩内容来自:济南模型公司,我们会有更多的精彩内容继续为您呈现,详情请点击:http://www.jnsymx.com
    Thank you for your reading and watching. The wonderful content of this article comes from Jinan Model Company. We will continue to show you more wonderful content. For more details, please click: http://www.jnsymx.com.

    -
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com