济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    沙盘模型制作有哪些风险点要我们控制!
    2019-6-27 14:00:55 来源:http://www.jnsymx.com
    沙盘模型的制作成本还是比较高的,所以我们在制作过程中要万分的注意,尤其是一些风险点,更需要我们全面的把控。下面,淄博模型公司就给大家总结一下沙盘模型制作的一些风险点,希望引起大家的重视!
    Sand table model production costs are relatively high, so we should pay great attention to the production process, especially some risk points, but also need our comprehensive control. Next, Zibo Model Company will summarize some risk points of sand table model making, hoping to attract your attention!
    一.沙盘模型制作要求
    I. Requirements for Sand Table Model Making
    1、应明确沙盘模型的样式、材料材质、是否为升降型等内容。
    1. The style of sand table model, material quality and whether it is lifting type should be clarified.
    2、若甲方有设计部,则可要求设计部设计方案,若无设计部则可要求乙方先拿出制作方案,再根据设计方案效果图进行优化,终形成甲方的制作要求。
    2. If Party A has a design department, Party A may request the design department to design the project. If there is no design department, Party B may ask Party B to produce the production plan first, and then optimize it according to the design plan effect drawing, finally forming the production requirements of Party A.
    二.材质及安装要求
    II. Material and Installation Requirements
    1、应事先根据需要明确原材料的材质,约定是国产或进口板材。
    1. The material of raw materials should be defined in advance according to the need, and the agreement is made for domestic or imported plates.
    2、制作及安装前应当与乙方沟通预留安装位置尺寸大小,实践中出现过模型过小,预留安装底座过大导致不匹配的情况,应当引起注意。

    2. Before fabrication and installation, Party B should communicate with the size of reserved installation location. In practice, too small model and too large reserved installation base lead to mismatch, which should be paid attention to.

    淄博沙盘模型公司作品

    三.质量及验收
    III. Quality and Acceptance
    1、质量应当到国家或行业标准,若甲方对质量有特殊约定的,应当按照特殊约定处理。
    1. Quality shall be up to national or industrial standards. If Party A has special agreement on quality, it shall be dealt with in accordance with special agreement.
    2、验收环节有两个阶段,一个阶段是到厂家验收执行验收环节,到甲方场地安装完毕后一个验收环节,采取两个环节验收基本可以保证产品的质量。
    2. There are two stages in the process of acceptance. One is to go to the manufacturer for acceptance and execution, and the other is to take two stages to ensure the quality of the product after the installation of the site of Party A.
    今天的精彩内容就暂且和大家介绍到这里了,如果大家还有其他想要了解的地方,欢迎大家到我们淄博模型公司的官网给我们留言评论:http://www.jnsymx.com,或者直接拨打我们的咨询热线,我们将给您一个满意的答复!
    Today's wonderful content will be introduced here for the time being. If you have other places you want to know, you are welcome to leave a message and comment on our Zibo Model Company's official website: http://www.jnsymx.com, or call our hotline directly. We will give you a satisfactory answer!
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com