济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    制作山体模型需要的材料和方法!
    2019-6-15 15:15:00 来源:http://www.jnsymx.com
    沙盘模型的制造经常有山体部分的制造,同时这也是比较重要的一个部分,下面德州模型公司就给大家普及一下制作山体模型需要的材料和方法,有需要的小伙伴可要记清楚了!
    Sand table models are often made of mountain parts, which is also an important part. Now Texas Model Company will popularize the materials and methods needed to make mountain models. Small partners who need to remember clearly!
    制作材料及方法
    Making materials and methods
    (1)山体模型的制作:用泡沫塑料制作成有缓坡、陡坡的山体。在绘出等高线图以后,按照一定的高程进行切割。山体好切割成六层。每层穿两个用作固定在底板上的小孔。
    (1) Making mountain model: Making mountain body with gentle slope and steep slope with foam plastic. After drawing contour map, cut according to certain elevation. The mountain body is best cut into six layers. Each layer is perforated with two small holes fixed to the bottom plate.
    (2)木框:用木条制作成木框,呈长方形,每框内安上绷紧的透明塑料薄膜(木框好制五个),每个塑料薄膜上分别绘有不同高程(100米至500米)的等高线。
    (2) Wooden frames: wooden frames made of strips are rectangular, each frame is equipped with tight transparent plastic film (wood frames are best made of five), and each plastic film is painted with contours of different elevations (100 to 500 meters).
    (3)底板:用木板作底板,在底板的四角安置四个立柱。立柱上标高程。

    (3) Baseboard: Use wooden boards as baseboard, and place four columns at the four corners of the baseboard. Elevation of column.

    德州模型公司作品

    (4)固定山体模型的木柱两根:木柱为圆柱体,长度以略低于山体模型高度为宜。在底板上开有两个安置木柱的圆孔。也可不用木柱,而在上下两层之间用磁铁固定。
    (4) There are two wooden columns in the fixed mountain model: the wooden column is a cylinder, and the length is slightly lower than the height of the mountain model. There are two circular holes in the floor for placing wooden columns. It can also be fixed by a magnet between the upper and lower layers without a wooden post.
    (5)等高线图的绘制:用同底板大小一致的较厚的白纸,绘出山体模型的等高线图一张,标明高程。
    (5) Contour plotting: A contour plot of a mountain model is drawn on a thick white paper with the same size as the base plate, and the elevation is marked.
    (6)安装:将山体模型的各层和薄膜木框,按由下至上的次序,依次安置在底板上的相应位置。
    (6) Installation: The layers of the mountain model and the thin-film wooden frame are placed in the corresponding position on the floor in order from bottom to top.
    今天的精彩内容由德州模型公司整理提供,欢迎大家收藏我们的官网:http://www.jnsymx.com,我们会定期发布更多的行业前沿信息,希望对大家有所帮助!
    Today's exciting content is provided by Texas Model Company. Welcome to collect our official website: http://www.jnsymx.com. We will regularly release more industry cutting-edge information, hoping to help you!
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com