济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    模型制作中有哪些骚操作?
    2019-5-14 14:30:00 来源:http://www.jnsymx.com
    德州模型公司在这里给大家介绍几种模型制作中的几个骚操作,希望对大家有所帮助!
    Texas Model Company here to introduce several models in the production of Sao operation, I hope to help you!
    1.凹造型神器--支架
    1. Concave Style Artifact--Bracket
    主要是在做奇奇怪怪的屋顶的时候,支架非常有用,各种造型基本都能解决。
    Mainly when making strange roofs, brackets are very useful, and all kinds of shapes can be basically solved.
    其实思路是和设计的时候的屋架是类似的,例如绩溪博物馆的屋架,就是实际工程中解决屋顶造型的方式。
    In fact, the idea is similar to the roof truss when it was designed. For example, the roof truss of Jixi Museum is the way to solve the roof shape in practical projects.
    2.底座加固器--龙骨
    2. Base reinforcement--keel
    为了利于模型的移动搬动,常常需要制作底座,有时候也会使用底座来按照模型灯光。
    In order to facilitate the moving of the model, it is often necessary to make a base, and sometimes the base is used to light the model.
    底座会比模型大一圈,简单的一块底板加四周的一圈围合很难做到稳固,所以内部的支撑龙骨很有必要,可以在尽可能少的用料下大幅度提升强度。

    The base will be one circle larger than the model, and it is difficult to be stable with a simple bottom plate and a circle around it. Therefore, it is necessary to support the keel inside, which can greatly enhance the strength with as little material as possible.

    德州模型公司作品展示

    3.墙柱垂直助手--垂直仪
    3. Vertical Assistant of Wall Column--Vertical Instrument
    有些时候,模型里有单独的墙体与柱子,因为底部切割的时候并不完美,粘在板上后并非垂直,如果数量多,高度大,会造成歪歪扭扭的局面。这时就可以制作几个简易的垂直仪。
    Sometimes, there are separate walls and columns in the model, because the bottom of the cut is not perfect, sticking to the board is not vertical, if the number of large, high, will cause a situation of distortion. At this time, several simple vertical meters can be made.
    4.强迫症福音--打磨器
    4. The Gospel of Obsessive-compulsive Disorder--Grinder
    模型制作的时候总有误差,有时候还有激光切割带来的黑边。
    There are always errors when making models, and sometimes there are black edges caused by laser cutting.
    需要用到细砂粗砂来打磨,打磨纸单用手来操作显得力不从心,这时就需要自制打磨器。(用3M喷胶将砂纸粘在棍、板、棒等材料上)
    Need to use fine sand and coarse sand to polish, polishing paper single hand operation appears to be inadequate, then need to make a home-made grinder. (Sandpaper is glued to sticks, boards, sticks and other materials by 3M spraying glue)
    以上就是德州模型公司给我们整理提供的精彩内容了,不知道小伙伴们懂了没有,如果大家还有疑问欢迎咨询我们官网的客服人员:http://www.jnsymx.com
    That's what Texas Model Company has done for us. I don't know if our partners understand it or not. If you have any questions, please consult our customer service staff on our official website: http://www.jnsymx.com.
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com