济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    园林沙盘模型中的绿地有三种制作方法
    2019-4-25 12:53:53 来源:http://www.jnsymx.com
    在园林沙盘模型中绿地是不可或缺的一个局部,在一些特别的沙盘模型中,绿地所占比重以至比主体建筑更大。所以在制造园林沙盘模型的时分,绿地的制造也不能马虎。潍坊模型公司的绿地的制造办法有三种:
    Green space is an indispensable part of garden sand table model. In some special sand table models, the proportion of green space is even larger than that of the main building. Therefore, in the process of making garden sand table model, green space can not be made carelessly. There are three ways to make the green space of Weifang Model Company:
    1、植绒法:按图纸的外形将若千块绿地剪裁好。假如选用植绒纸做绿地时,—定要留意资料的方向性。由于植绒纸方向不同,在阳光的映照下,则呈现出深浅不同的效果。所以,运用植绒纸时一定要留意资料的方向性。待全部绿地剪裁好后,便可按其详细部位停止粘贴。在选用及时贴类资料停止粘贴时,普通先将一角的覆背纸揭下停止定位,并由上而下停止粘贴。粘贴时,一定要把气泡挤压进来。如不能将气泡完整挤压岀去,不要将整块绿地 揭下来重贴,由于及时贴属塑性材质,下揭时用力不当会形成绿地变形.所以,遇气泡挤压不尽时,可用大头针在气泡处刺上小孔停止排气,这样便能够使粘贴面坚持平整。
    1. Flocking method: According to the shape of the drawing, if 1000 pieces of green space are cut well. If choosing flocking paper as green space, we must pay attention to the direction of information. Because of the different orientation of flocking paper, under the sunshine, it shows different effects in depth. Therefore, when using flocking paper, we must pay attention to the direction of information. After all the green areas have been cut, they can stop pasting according to their detailed parts. When choosing to stop the pasting of timely pasting materials, the general first step is to uncover the corner of the backing paper and stop positioning, and stop pasting from top to bottom. When pasting, you must squeeze the bubbles in. If the air bubbles can not be extruded completely, do not uncover the whole green space and re-paste it. Due to the timely adherence to plastic materials, the green space will be deformed if the force is not appropriate when uncovering. Therefore, when the air bubbles are not extruded, a pin can be used to puncture small holes in the air bubbles to stop exhaust, so that the adhesive surface can be kept flat.

    2、喷漆法:如今还比拟盛行的是用喷漆的办法来处置大面积绿地,此种办法操作较为复杂。首先,要选择好适宜的喷漆。普通选择的是自喷漆,由于自喷漆操作烦琐。其次要 按绿地详细外形,用遮挡膜对不做喷漆的局部停止遮挡。在选择遮挡膜时,要留意选择弱胶类,以防喷漆后揭膜时毁坏其他局部的漆面。另一种是先用厚度为0.5mm以下的PVC板或ABS板,按其绿地的外形停止剪裁,然后苒停止喷漆,待全部喷漆枯燥后停止粘贴。此种方杂宜大比例模型绿地的制造。由于为这种制造办法能够形成绿地与路面的高度差,从而更形象、逼真地反映环境效果。

    潍坊模型公司作品展示

    2. Painting method: It is more prevalent nowadays to use spraying method to deal with large areas of green space, which is more complex to operate. First of all, we should choose the suitable spray paint. The common choice is self-spraying paint, because the operation of self-spraying paint is cumbersome. Secondly, according to the detailed shape of the green space, use the shielding film to stop the shielding of the parts that are not sprayed. When choosing the shielding film, pay attention to the selection of weak glue, in order to prevent damage to other parts of the paint surface when uncovering the film after spraying. The other is to use PVC or ABS boards with thickness less than 0.5mm to stop cutting according to the shape of green space, then stop painting, and stop pasting after all painting is dry. This kind of miscellaneous large-scale model green space manufacturing. Because the height difference between green space and road surface can be formed by this manufacturing method, the environmental effect can be reflected more vividly and vividly.
    3、仿真草皮或纸类:在选用仿真草皮或纸类作绿地停止粘贴时,要留意黏合剂的选择。假如是往木质或纸类的底盘粘贴时,可选用白乳胶或喷胶。假如是往有机玻璃板底盘上粘贴,则选用喷胶或双面胶带。在用白乳胶停止粘贴时,一定要留意胶液稀释后再用。在选用喷胶粘贴时,一定要选用77号以上的高黏度喷胶,切不可选用77号以下低黏度喷胶。
    3. Simulated turf or paper: When choosing simulated turf or paper as green space to stop pasting, attention should be paid to the choice of adhesives. If it is to wood or paper chassis paste, you can choose white latex or spray glue. If it is pasted to the plexiglass plate chassis, spray or double-sided tape is selected. When using white latex to stop pasting, we must pay attention to the dilution of the glue before using it. When choosing spray adhesive, we must choose high viscosity spray adhesive above 77, but not low viscosity spray adhesive below 77.
    好了,以上由潍坊模型公司整理提供的精彩内容就到这里了,更多相关的业务问题可以咨询我们官网的客服人员:http://www.jnsymx.com!谢谢支持
    OK, that's all for the wonderful content provided by Weifang Model Company. More business related questions can be consulted with our customer service staff on the official website: http://www.jnsymx.com! Thanks for your support.
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com