济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    聊城模型公司关于吹塑纸的加工技术的分享
    2019-3-30 11:45:33 来源:http://www.jnsymx.com
    聊城模型公司在模型制作的过程中经常会用到的一种材料就是吹塑纸,下面我们就简单介绍一下这种材料的加工方法吧!
    Blow-moulded paper is one of the materials that Liaocheng Model Company often uses in the process of model making. Let's briefly introduce the processing method of this material.
    1.吹塑纸的加工:
    1. Processing of blow-moulded paper:
    (1)用作斜坡屋顶、壁砖墙面、圆柱饰面的吹塑纸的加工:选择恰当颜色的吹塑纸,用钢板尺和大头针在吹塑纸上画下间距在1毫米左右的条纹,表示斜坡屋顶的瓦纹或铁皮屋面的纹理。且纹理方向与坡向分歧。也可表示墙面壁砖的纹理,且纹理为程度方向。或表示圆柱的饰面,且纹理为竖直方向。
    (1) Blow-moulding paper for sloping roofs, wall tiles and cylindrical decorations: Choose appropriate color blown-moulding paper, draw stripes with steel plate rulers and pins on the blown-moulding paper with a distance of about 1 mm, indicating the texture of tile or tin roofs on sloping roofs. And the texture direction is different from the slope direction. It can also indicate the texture of wall tiles, and the texture is in the direction of degree. Or the surface of a cylinder with a vertical texture.
    (2)用作广场、停车场、人行步道的空中加工:选择深灰色或其他颜色的吹塑纸,依照事前设计的空中纹理图案,用钢板尺和大头针来描写加工。可采取规则图案和不规划图案,表示细致空中和粗糙空中。
    (2) Air processing for square, parking lot and sidewalk: Choose dark gray or other color blow-moulded paper, according to the air texture pattern designed beforehand, describe the processing with steel plate ruler and pin. Regular and unplanned patterns can be adopted to represent fine and rough air.
    2.壁纸用作墙面的加工处置:选择恰当颜色和质感的壁纸,裁剪下一面墙大小的一块,反面与等大的一块吹塑纸粘接好,待白胶干后在正面用铅笔悄悄地画好窗洞的位置,然后用钢板尺和手术刀依次刻掉每个窗洞,这样就加工成墙面了。

    2. Wallpaper for wall processing: select the appropriate color and texture wallpaper, cut a wall size piece, the reverse side and a large piece of blow-moulded paper bonded well, to dry white glue in the front with a pencil to quietly draw the location of the hole, and then use steel ruler and scalpel to cut each hole in turn, so as to process into a wall.

    聊城模型公司

    3.细纹绢墙面的加工:将细纹绢用稀释后的乳白胶粘在钢板纸上,待干后在钢板纸一面用细铅笔悄悄画上窗洞的位置,然后用手术刀刻掉窗洞,这样就加工成了细纹绢的墙面。
    3. Processing of fine-grained silk wall: The thin-grained silk is glued to steel sheet paper with diluted latex glue. After drying, the position of the window hole is quietly drawn with a fine pencil on the side of steel sheet paper. Then the window hole is carved with a scalpel, thus the wall of fine-grained silk is processed.
    看了上面的内容不知道小伙伴们明白了没有!今天的精彩内容就给大家介绍到这里了,想要了解更多关于聊城模型公司在制作模型时的相关信息,请收藏我们的网站:http://www.jnsymx.com谢谢大家的支持!
    Looking at the above content, I don't know if my friends understand it. Today's wonderful content is introduced here. To learn more about Liaocheng Model Company when making models, please collect our website: http://www.jnsymx.com. Thank you for your support!
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com