济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    建筑模型常见的问题你知道是什么吗?
    2018-12-21 11:00:18 来源:http://www.jnsymx.com
    弧面模型
    Cambered surface model
    弧面模型根本都是在犀牛中完成规划的,若要将其等份额制造出来,用平整的资料来实现弧面的作用,要么板材曲折,要么块状资料切开,要么直接3D打印。
    Globoidal models are basically planned in rhinoceros. If we want to make them equal share, we can use flat data to realize the function of Globoidal surface, either the plate is tortuous, or the block data is cut, or direct 3D printing.
    1.板材曲折
    1. Bending of sheet metal
    将所需制造的面 在犀牛中运用UnrollSrf指令,能够精确地将其展开为二维面,然后选用激光切开或者打印出相应份额图纸对着裁剪即可得到。
    By using UnrollSrf command in rhinoceros, the required facets can be expanded into two-dimensional facets accurately, and then cut or print out the corresponding share drawings to cut them.
    所选板材需求是简单曲折的,例如白卡,1mmpvc板等。若是曲折幅度不大,则稍厚的板材也能够被运用。
    The demand for selected sheets is simple and tortuous, such as white card, 1mm PVC board, etc. If the zigzag range is not large, slightly thicker plates can also be used.
    2.泡沫板切开
    2. foam board incision
    泡沫板搭配电热丝切开机除了能够制造横平竖直满是直线的体块外,也是能够进行弧线,曲面制造的。
    Foam board with electric heating wire cutting machine can not only make horizontal flat vertical straight line block, but also can make arc and curved surface manufacturing.
    3.特殊资料的曲折
    3. The twists and turns of special data
    木条,ABS管等资料。这些资料的曲折,需求改动其物质状况,木条在水中充沛泡过后简单曲折,ABS管在加热后简单曲折(可用大功率吹风机-热风档)用钉子等工具辅佐固定曲面,等资料安稳后,即可成型。
    Wood strips, ABS pipes, etc. The twists and turns of these materials, the need to change their material conditions, the simple twists and turns of the wooden strips after abundant soaking in water, the simple twists and turns of the ABS tube after heating (high-power hair dryer-hot wind gear) with nails and other tools to help fix the surface, and so on, after the data is stable, it can be formed.
    特殊纹路、质地

    Special pattern and texture

    有些模型需求相对逼真,想要表现混凝土肌理,砖砌纹路等。
    Some models need to be relatively realistic, to show concrete texture, brick lines and so on.
    1.混凝土
    1. concrete
    泡沫板,主要是用作修建保温资料的挤塑板,能够用丙烯颜料干刷。选取灰色丙烯颜料,干刷两遍后至干,可得到相似混凝土的肌理。
    Foam board is mainly used for building thermal insulation data Extrusion board, and can be painted with acrylic paint. The texture of similar concrete can be obtained by choosing grey acrylic pigments and brushing them twice before drying.
    2.砖砌
    2. bricks
    能够在资料外表用刀划槽,在涂以相应的颜料(依旧引荐防水的丙烯颜料)。
    It can use knife to cut grooves on the surface of data and apply corresponding pigments (water-proof acrylic pigments are still recommended).
    3.水面
    3. water surface
    简单的是留白,其次是涂颜料,再者是铺蓝色复制纸(半透明),或者直接铺透明玻璃纸(有倒影作用),终极是复制纸上再加玻璃纸。
    The simplest is to leave white, followed by paint, and then lay blue copy paper (translucent), or directly lay transparent cellophane (reflective effect), and ultimately copy paper plus cellophane.
    4.通用办法
    4. General approach
    逼真作用的一个通用办法是直接ps中制造图画,五颜六色高清打印后贴在外表。能够将尘垢、深浅等全部表现出来,但没有相对应的质地,仍然是润滑的贴纸算了。
    A common method of realism is to make pictures directly in PS and paste them on the surface after colorful high definition printing. It can show all the dirt, depth and shallowness, but without the corresponding texture, it is still a lubricating sticker.
    以上信息是我们日照模型公司整理发布希望对大家有所帮助我们的网站是:http://www.jnsymx.com
    The above information is our Sunshine Model Company's collation and release of hope to help you all on our website is: http://www.jnsymx.com!
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com