济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    沙盘模型制作时应如何布线,你知道吗?
    2018-8-10 14:15:32 来源:http://www.jnsymx.com

    大家都知道沙盘模型是展示整个艺术的精华,那么沙盘模型里轨迹线路的布置就相当于其血管!如果轨迹线路的布置不是很好的话,那么可想而知其效果也是大打折扣的!那么沙盘模型制作时轨迹线路的安置要注意什么呢?或者说沙盘模型制作时应如何布线?
    Everyone knows that the sand table model is the essence of the whole art, so the placement of track lines in the sand table model is equivalent to its blood vessels! If the track layout is not very good, then it is conceivable that the effect is also a big discount! So what should be paid attention to the placement of track lines when making the sand table model? Or how should the sand table model be made?
    1、轨迹线路在规划上 要尽量防止呈现S形弯道(即一个左弯轨迹直 连续一个右弯轨迹),因为稍微长一点的机车 和车厢在经过S形弯道时很容易被别越轨;
    1. Trajectory routes should be planned to avoid S-shaped curves (i.e. a left-turn track is straight and a right-turn track is continuous), because slightly longer locomotives and carriages are easy to be detached when passing through S-shaped curves;
    2、如果规划了坡道,必须要控制斜度,斜度选用锌合金的,不然将来由于轨迹氧化造成接 触不良会给你带来很大的烦恼。弯道的小半径,选择时既要考虑沙盘的面积尺寸,还要兼顾到在轨迹上行进的机车和车 厢的长度,不要做好后,稍微长一点的机车、 车厢都不能顺利经过;


    潍坊模型公司2. If the ramp is planned, the slope must be controlled. Zinc alloy is the best choice for the slope. Otherwise, bad contact due to trajectory oxidation will cause you great trouble in the future. When choosing the minimum radius of the bend, we should consider not only the size of the sand table, but also the length of the locomotive and carriage traveling on the track. After not doing well, the slightly longer locomotive and carriage can not pass smoothly.
    3、另外对于国内 车迷而言,百万城的轨迹和道岔还是一个很不错的选择,轨迹能够直接运用,道岔只需在安 装前对轨尖部进行细心打磨和修整,就能够防止绝大部分的越轨事端。对于资金很富余的车迷朋友,还能够有更多的选择。 要注重沙盘底座的规划,一是下部要留出穿线的空间,方便布线和今后改造。
    3. In addition, for domestic car fans, millions of city track and turnout is a good choice, the track can be used directly, the turnout only needs to be carefully polished and trimmed before installation, can prevent most of the derailment. There are more choices for the fans and friends who have a lot of money. We should pay attention to the planning of the sand tray base. First, the lower part should leave space for threading to facilitate wiring and future transformation.
    以上就是关注沙盘模型制作时布线的方法,想要了解更多关于模型的知识,可以关注我们的网站,在网站中有更多专业知识的介绍!
    Above is concerned about the sandbox model production wiring method, want to know more about the model of knowledge, you can pay attention to our website, there are more professional knowledge on the site!

    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com