济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    你知道机械模型如何保养吗?
    2018-7-13 10:00:19 来源:http://www.jnsymx.com

    随着机械模型制作工艺的缺失,很多人机械模型制作的一些小细节都不是很熟悉,所以对于机械模型制作中的一些工具的保养都不是很到位,导致自己的机械模型存放的过程中发生的不同程度的损坏,那现在我们就来说说机械模型工具是怎么保养。
    With the lack of mechanical model manufacturing process, a lot of small details of mechanical models are not very familiar, so the maintenance of some tools in mechanical model production is not very good, resulting in different degrees of damage in the process of storage of their own mechanical models, and we are now talking about machinery. How to maintain the model tool.
    日照模型公司

    一般来说机械模型上是水贴纸是比较脆弱的,存放的时间长了就容易干裂,所以模型在摆放的时间长了就要将水贴纸用食品保鲜膜包好。放在冰箱里,等到使用的时候就可以取出来。要是遇到水贴纸干裂,可以用模型漆稀释后,喷在水贴纸上,反复的多喷几次就可以修复。
    In general, the mechanical model is water sticker is relatively fragile, the storage time is easy to crack, so the model in the long time to put water sticker with food preservative film wrap. Put it in the fridge and pick it up when it is used. If you encounter a water sticker, you can use the model paint to dilute it, spray it on the water sticker, and repeat it several times to repair it.
    机械模型制作过程中,总会遇到“洗”的步骤,用的就是打火机燃料的“Zippo”油,它的作用是让油漆固化,同时让模型“旧化”,这样看起来的效果非常自然。,用它“洗”模型,不但干的快,而且不会腐蚀粘结点,“洗”后的效果非常好。
    In the process of making the mechanical model, the "washing" process is always encountered, using the "Zippo" oil of the lighter fuel. It is used to solidify the paint and make the model "old", so it looks very natural. Using the "wash" model, it not only works fast, but also does not corrode the bonding point. After washing, the effect is very good.
    气管损坏进行更换,要对机械模型几个重要零部件进行重点跟踪检测:介绍顶出、导向部件的作用是确保模型开合运动及塑件顶出,若机械模型其中任何部位因损伤而卡住,将导致停产,故应经常保持模型顶针、导柱的润滑,并定期检查顶针、导柱等是否发生变形及表面损伤,一经发现,要及时更换;完成一个生产周期之后,要对机械模型工作表面、运动、导向部件涂覆专业的防锈油,尤应重视对带有齿轮、齿条模型轴承部位和弹簧机械模型的弹力强度的保护,以确保其始终处于佳工作状态,随着生产时间持续,冷却道易沉积水垢、锈蚀、淤泥及水藻等,使冷却流道截面变小,冷却通道变窄,大大降低冷却液与模型之间的热交换率,增加企业生产成本,因此对流道的清理应引起重视;对于热流道机械模型来说,加热及控制系统的保养有利于防止生产故障的发生,所以特别重要。
    When the damage of the trachea is replaced, the key parts of several important parts of the mechanical model should be tracked and tested. The role of the top out and guiding components is to ensure that the model is closed and the plastic parts are ejected. If any part of the mechanical model is stuck to the damage caused by damage, the model should be lubricated by the model thimble and the guide column. And regularly check whether the thimble, guide column and other deformation and surface damage, once found, should be replaced in time; after the completion of a production cycle, the mechanical model working surface, motion, and guiding components should be coated with professional antirust oil, especially on the projectile with the gear, the rack type bearing and the spring mechanical model. The protection of force strength to ensure that it is always in the best working state. With the continuous production time, the cooling channel easily deposits scale, rust, silt and algae, which makes the cooling channel cross section smaller and the cooling channel narrowed, greatly reducing the heat exchange rate between the coolant and the model and increasing the production cost of the enterprise. Therefore, the flow channel is increased. The cleaning should be paid attention to; for the hot runner mechanical model, the maintenance of the heating and control system is beneficial to prevent the occurrence of the production failure, so it is particularly important.

    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com