济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    应该如何制作商业沙盘模型中的人物形象?
    2018-7-11 10:46:20 来源:http://www.jnsymx.com

    为模拟商场的真实场景,一般的商业沙盘模型中都会有很多种人物形象。其中有男女老少之分,有爱高胖瘦之分,有动静之分。那么,怎么刻画出这些人物形象呢?商业沙盘模型中的人物形象怎么制作呢?人物形象的制作材料多样,制作方法也多样,提醒大家根据模型的特点来进行选择。
    To simulate real scenes in shopping malls, there are many kinds of characters in the general business sand table model. There are men, women, old and young, with love, fat, and thin. Then, how to portray the image of these characters? How do the characters in the business sand model are made? The variety of the material and the various methods of making the characters are also reminded to choose according to the characteristics of the model.
    制作商业沙盘模型中的人物
    Making the characters in the business sand table model
    1、小比例的模型(比例为1:500):我们可以用苋蒿种子、棕树针叶或者小的销钉来表现人物。
    1, a small proportion of the model (1:500): we can use amaranth seeds, palm trees or small pins to represent characters.
    2、用木头切片制成的人物(比例为1:100到1::50):先找出合适的图像,将其缩小到符合模型的比例,将简化后的轮廓转印到一个方木上面,然后将人物轮廓外的外框切掉。后再从木质轮廓上切下所需要的人物。
    2, the characters made of wood slices (proportion 1:100 to 1:: 50): first find the appropriate image, reduce it to the proportion of the model, transfer the simplified outline to a square tree, and cut off the outer frame outside the figure. Finally, cut out the characters needed from the wood profile.
    济南模型公司

    3、剪影人形(比例为1:100到1:10):将图像在计算机或者影印机上进行适当地‘按照一定比例地放大或者缩小,然后转印到厚纸板、聚苯乙烯或有机玻璃上进行剪切。
    3. The figure of the silhouette (from 1:100 to 1:10): the image is properly amplified or reduced in a certain proportion on the computer or the photocopier, and then transferred to the thick cardboard, polystyrene or organic glass to be cut.
    4、用纸和大头针制成人形(比例为1:200和1:100):用带有颜色或者花纹的纸剪切出不规则的小纸片,将它弄皱,然后用透明的白色或者黑色的大头针传过去。
    4. Make adult form with paper and pin (proportion 1:200 and 1:100): cut out irregular small pieces of paper with color or pattern, crease it and pass it over with transparent white or black pins.
    5、用硬泡棉制成的人形(比例为1:200和1:100):它如同纸人一样,能够快捷、简单地制作完成。将硬泡棉切成厚1mm,宽1-2cm的长条,然后将它分成若干个小正方片,用大头针纵向穿过去。后用一把细剪刀剪出人形的轮廓。
    5, the human form made of hard foam (1:200 and 1:100): it can be made quickly and simply as a paper man. Cut the hard foam into a thick 1mm and wide 1-2cm strip, then divide it into several small square pieces and use the pins to lengthwise. Finally, a fine scissors are used to cut the outline of the human form.
    6、用西印度轻木板制成的人形(比例为1:100):将西印度轻木薄板切成不同长度的板条及不同的横切面。用一根大头针插上4-5片小板条。后再将人形进行上色处理。
    6. The humanoid (1:100) made of light wooden boards from West India: cut the light wood sheet of West India into different lengths of lath and different cross sections. Insert 4-5 small slate with a pin. Finally, the human form is treated with color.
    在制作模型的时候,比例较大的模型人物可以使用黏土、陶土或者铁丝来进行制作。在比例较大的模型当中,也可以将人形当成人体模型,比如四肢可动的玩偶来进行制作。还可以将每个部分都做成抽象立体的。这个要根据具体的模型特点来做。
    When making models, the larger models can be made of clay, clay or iron wire. In the larger proportion of the model, the human form can also be used as a human model, such as moving limbs dolls. Each part can also be made into abstract and three-dimensional. This is based on the specific characteristics of the model.

    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com