济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    水面建筑模型制作要点
    2018-5-4 13:36:53 来源:http://www.jnsymx.com
        水面是建筑沙盘模型中经常出现的配景之一。不同的沙盘模型,水面的表现都不一样。总的来说,水面模型都是根据建筑沙盘模型的风格和比例来制作的。那么,建筑模型中的水面具体是怎么制作的呢?

    The water surface is one of the frequently seen scenes in building sand table models. Different sand table models show different water surfaces. In general, the surface model is based on the style and proportion of the sand table model. So how do we make the water surface in the building model?

    潍坊模型公司

    1、在制作建筑模型比例尺较大的水面时,需要考虑水面和路面的高度差。一般通常采用的方法是,先将底盘上水面部分进行漏空处理,然后将透明有机玻璃板或带有纹理的透明塑料板按设计高差贴于漏空处,并用蓝色自喷漆在透明板下面喷上色彩即可。用这种方法表现水面,一方面可以将水面与鲈鱼的高差表现出来;另一方面透明板在阳光照射和底层蓝色漆面的反衬下,其仿真效果非常好。
    When building the larger scale of the building model, the height difference between the water surface and the road surface should be considered. Generally, the usual method is to remove the water from the surface of the chassis, and then apply the transparent organic glass plate or the transparent plastic plate with the texture to the leakage at the design height, and spray the color under the blue spray paint under the transparent plate. Using this method to show the water surface, on the one hand, it can show the height difference between the water surface and the sea bass; on the other hand, the transparent plate has a very good simulation effect under the contrast of the sunlight and the blue surface of the bottom.
    2、在制作建筑模型比例尺较小的水面时,水面与路面的高差就可以忽略不计。制作时,可直接用蓝色即时贴按其形状进行裁剪。裁剪后,按其所在部位粘贴即可。另外,还可以利用遮挡着色法进行处理。其做法是,先将遮挡膜贴于水面位置,然后进行漏刻。刻好后,用蓝色自喷漆进行喷色。待漆干燥后,将遮挡膜揭掉即可。
    When building the smaller scale of the building model, the height difference between the water surface and the road surface can be neglected. When making, it can be clipped directly with the blue instant paste according to its shape. After cutting, paste it according to the place where it is located. In addition, the occlusion coloring method can also be used for processing. The practice is to stick the shielding film on the surface of the water and then leak it. When engraved, spray color with blue paint. When the paint is dried, the shield film can be removed.
    以上信息由济南模型公司http://www.jnsymx.com/,整理提供,希望能对大家有帮助。
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com