济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    工业模型制作的步骤流程
    2018-3-27 18:35:13 来源:http://www.jnsymx.com
    1、设置沙盘:先将沙盘框放置稳妥,好使沙盘的方位和现地一致,再铺上3-5厘米厚,湿度适当的沙土,并用木板刮平压紧,作为低等高线的平面,然后打上和地形图相应的方格,在沙盘框周围注记相应的编号.
    1: first, set up the sandbox sandbox box placed securely, the best sand table and field range, and then covered with 3-5 cm thick, sandy soil humidity appropriate, and wood scraping and pressing, as the plane hit the lowest contour, and then map the corresponding box in the sand box around the note on the corresponding number.
    2、堆积地貌
    2. Accumulation of landforms
    (1)依照方格将地形图上已选定的低等高线,能控制地貌基本形状的等高线,以及山顶,鞍部,山脚,倾斜变换点和江河等到的位置画到沙盘面上.
    (1) in accordance with the minimum square contour has been selected on a topographic map, contour, shape and topography can control the basic mountain, at the foot of the saddle, and wait until the river, slant transform position to the sand surface.
    (2)将计算好的山顶,鞍部,山脚,倾斜变换点和江河弯曲部等起伏明显和点,分别插上竹签.竹签的高度,为该点在沙盘上的高度加上底层沙土的厚度.

    (2) the calculated peak, the saddle, at the foot of the mountain, and river bend slant transform etc. fluctuations and points, respectively inserted on the bamboo. Bamboo height, the height of the point in the sand and sand bottom thickness.

    淄博模型公司

    (3)在低等到高线范围内,以竹签和等高线为依据,先堆出山顶,鞍部,山背等的概略形状作为骨干,再修整其他部分.如沙盘较大,可分片堆积,先堆积进出困难处,后堆积进出方便处.堆积时,应随时对照地形图,以正确显示地貌的起伏状况,并应随时将沙土压紧,以免崩塌变形.如有较大的江河,湖泊,应在修整地貌时一并挖成.堆积完毕,应作全面检查和修整,并从高到低逐层撒上与地面颜色相符的锯末(或喷以颜色).
    (3) in the lowest range until the line, with bamboo and contour as the basis, the first pile top, saddle, mountain back outline shape as the backbone, and then trimmed. Other parts such as sand table is large, can be divided into sheet stacking, accumulate import difficulties, after accumulation and convenient. When piling up, should at any time control to display correct topography, landform and relief, should be to avoid sand compaction, collapse deformation. In case of large rivers and lakes, together with the landform in the dressing should be opened up. Packing is completed, we should make an overall inspection and repair, and from high to low level and with the ground color with sawdust (or spray color).
    3、设置地物:沙盘上的地物,如房屋,铁路,桥梁,树木和独立地物等,多用相似的模型表示,公路和乡村路用宽窄不等,颜色不同的纸(布条)表示;江河用蓝色纸条或锯末表示;树林用小树枝或绿色锯末表示.地物的大小,应与水平比例尺相适应,关系位置要求正确.设置地物,应按水系,居民地,道路,树林和独立地物的顺序进行设置.后,在相应的位置上插上地名,江河名,山名和高程注记等纸牌.
    3, set the object: the layout features, such as housing, railways, bridges, trees and independent features, represented by many similar models, ranging from narrow roads and rural roads, different color paper (cloth); rivers with blue note or sawdust representation; twigs or green wood sawdust. The size of the object, with the horizontal scale to adapt to the relationship between the position correctly. Set the object, according to residents, water, roads, forests and independent features in order to set. Finally, insert the names in the corresponding position of rivers, mountains and other elevation note cards.
    4、设置战术情况:战术情况,通常根据预定的作战方案或训练想定,用制式的兵棋,临时制作的队标,队号等进行设置.设置时,先设战斗分界线,而后按先敌后我,由前沿到纵深的顺序进行.如需显示敌,我设防工程时,应先设置工作设施,后设置战术情况.
    4, set up the tactical situation: the tactical situation, usually according to a predetermined operational plan or training scenario, using standard wargame, improvised team, team number and other settings. Settings, first set up a battle line, and then according to the first enemy I, from the front to the depth of the order to display the enemy. I, fortification project, should first set up the work facilities, set up after the tactical situation.
    5、整饰上述各项工作完成后,应详细对照检查,并标明沙盘的名称,指北箭头和比例尺,需要时用线绳拉上坐标网.
    5, finishing the work completed, should carefully check, and indicate the table name, refers to the north arrow and the scale, need to use rope pull on the coordinate network.
    本文由淄博模型公司进行编写,想要了解更多的产品及更详细的精彩内容,请关注我们的官方网站: http://www.jnsymx.com 您的惠顾是对我们很大的支持。
    This article is written by Zibo model company. If you want to know more products and more detailed highlights, please pay attention to our official website: http://www.jnsymx.com, your patronage is a great support for us.
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com