济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    工业模型制作喷漆流程技术要点
    2018-2-27 16:34:48 来源:http://www.jnsymx.com
    手涂优点是可以涂一些较细的地方,不过涂较大面积时就容易出现笔痕。喷笔喷大面积时十分均匀,油层比较薄,效果比较好,但细小的地方就要用分色纸,比较麻烦。
    The advantage of hand coating is that it can be applied to some finer places, but it is easy to get a pen mark when applying a large area. Airbrush spray area is very uniform, the reservoir is thin, the effect is better, but the small place to use colored paper, more trouble.
    常用的模型油漆一般有水性油漆和油性油漆。我个人觉得油性比较快干,手涂时较均匀,而水性就比较适合
    Commonly used model paints are usually water-based and oily paint. I personally feel that the oil is faster dry, the hand is more uniform, and the water is more suitable.

    用于喷笔。要注意的是水性和油性两种油漆是不能混合的。而且使用前必须稀释。工业模型上色前先搅拌油漆使之均匀。用笔毛较软的画笔沾一些涂料,并在瓶口轻刮一下,调节笔上的含漆量。

    淄博模型公司

    For airbrush. It is important to note that two kinds of paint can not be mixed with water and oil. And it must be diluted before use. Before the industrial model is colored, the paint is stirred to make it even. Dip some paint in a brush with a soft brush and gently scrape it at the mouth of the bottle to adjust the amount of paint on the pen. Pen
    下笔时由左至右,以稳定均匀的力道移动。涂完笔后,下一笔也是由左至右涂,并且和笔的边缘重叠一点点。下笔时力道要轻,要有让笔上的油漆轻轻流在表面的感觉,动作越轻,笔痕越不明显。涂的时候要注
    From left to right, move with a stable and uniform path. After the first painting, the next pen is also left to the right and overlaps the first edge. When light to write, to let the paint brush gently flows on the surface of the feeling, action more light, marking is not obvious. Note when you apply it
    意何时要再沾上油漆,不要等到笔上没油漆才沾上,要尽量保持画笔在湿润状态。等层油漆差不多干时(七八成吧),可以上第二层油漆,方向和层垂直。这叫“十字上色法”。
    When you want to touch the paint again, don't wait until the pen has no paint. Try to keep the brush in a wet state. The first layer of paint is almost dry (seven or eight per cent) and can be painted in second layers and perpendicular to the first floor. This is called the "cross color".
    上第二层色力道和方向要更小心。因为层还未干透,太大力会刷起层。当层油漆未干透再加上第二层新漆,这样就比较容易处理好笔痕,使之不明显。
    Second layers of color path and direction should be more careful. Because the first layer is still not dry, it will be too strong to brush the first layer. When the first layer of paint is not dry and second layers of new paint are added, it is easier to handle the pen mark and make it not obvious.
    本文由淄博模型公司整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.jnsymx.com我们会有更多精彩内容等你查看。
    This article is organized by Zibo model company. Do you have any knowledge of these contents? More contents please click: http://www.jnsymx.com, we will have more wonderful content waiting for you to check.
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com