济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    手工锯切模型的怎么处理为好?
    2017-12-4 19:43:05 来源:http://www.jnsymx.com
    手工锯切是指采用手工锯对质地厚实、竖韧的型材作加工,常用工具有木工锯和港剧两种。木工锯的锯齿较大,适用于加工实木板、木芯板和纤维板等,锯切速度较快。钢锯的锯齿较小,适用于金属、塑料凳质地严密的型材。
    Manual cutting refers to the use of manual sawing profile on thick texture and vertical ductile processing, commonly used tools and woodworking saw two Hong kong. The sawteeth of the woodworking saw are larger, and are suitable for processing solid wood boards, wood core boards and fiber boards and so on. The sawing speed is faster. The smaller the sawtooth hacksaw is suitable for metal, profiles, plastic stool texture tight.
    锯切前要对被加工的建筑模型资料作准确定位放线,并预留出恰当的锯切损耗,其中木材要预留1.5~2mm,金属、塑料要预留1mm,单边锯切的长度不宜超越400mm,防止型材产生开裂。锯切时要单手持锯,单手将被加工型材按压在台面上,针对厚度较大的实木板也能够用脚踩压固定,锯切幅度不宜超越250mm,待纯熟后能够恰当进步频率。锯切型材至末端时速度要减慢,防止型材产生开裂。锯切后要对被加工型材的切面边缘作打磨处置,木质资料还能够进一步刨切加工。
    Before sawing, we must accurately locate and line the processed building model data, and reserve the appropriate sawing loss. In order to reserve 1.5~2mm for wood, metal and plastic must be reserved for 1mm. The length of single side sawing should not exceed 400mm, so that the profile can be cracked. When sawing, a single hand saw is used to press the processed section on the table surface with one hand. For the larger solid wood panel, it can also be fixed by foot pressure. The sawing extent should not exceed 250mm, and the frequency can be improved properly after being cooked. When cutting the profile to the end, the speed should be slowed down to prevent the section from cracking. After sawing, the cutting edge of the processed section should be grind and dispose, and the wood data can be further machined.
    手工锯切能处理粗大型材的下料、外型等工艺问题,但是不能作为进一步深化塑造,针对弧形或曲线边缘还是要采用专用机械来加工,一切以建筑模型的终效果为准。
    Manual sawing can deal with the technological problems such as blanking and appearance of large profiles, but it cannot be further deepened, for arc or curve edges, or special machinery should be applied, all in the final effect of building models.
    本文由潍坊模型公司整理发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.jnsymx.com我们会有更多精彩内容等你查看。
    This article is organized by Weifang model company. Do you have any knowledge of these contents? More contents please click: http://www.jnsymx.com, we will have more wonderful content waiting for you to check.
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com