济南模型公司
  • 济南市市中区
  • 经十西路6288号1号楼101室
  • 电话:0531-55504101
  • 网站:http://www.jnsymx.com
  • 手机:18660800958 13869134430
新闻中心当前位置:首页-新闻中心
    模型的十大制造流程
    2017-10-16 14:10:32 来源:http://www.jnsymx.com
    1. 收集资料:真车照相测绘,或者有现成的图纸,现在一般客人能提供3D图(solidwork、proe等),大小尺寸直接测量,这样就方便很多了。根据前面的资料进行石膏样的制作,主要是用来确定外形、轮廓、弧度、和模型尺寸。
    1. data collection: the real car photographic mapping, or ready-made drawings, now guests can provide 3D (SOLIDWORK, proe), the size of direct measurement, so a lot of convenience. According to the previous data, the plaster is made to determine the shape, profile, radian, and model size.
    2. 做手板:手板一般要做到模型的1倍尺寸或以上,手板是模具制造的依据,主要是来确定模型的零件数、内部机构、功能等等。
    2. to do the hand: the general hand to achieve the model of 1 times the size or above, the hand is the basis of mold manufacturing, mainly to determine the number of parts of the model, internal institutions, functions and so on.
    3. 修改手板:根据客人的资料对手板进行修改再次确认。
    3. modify the board: according to the information of the guests, modify the opponent board to confirm again.
    4. 画成品图:根据手板画零件图、模具排位图来画成品图,这些资料是模具材料采购的依据。
    4. drawing finished product drawing: according to the hand drawing parts drawing, mold layout chart to draw the finished product, these materials are the basis for the purchase of mold materials.
    5. 激光抄数、分模:模型手板已经是客户确认过的,这是为了保证模型不发生变化保证模型的高仿真度。
    5. laser scanner, die: hand model is confirmed with the customer, this is to ensure that the model does not change to ensure the high degree of simulation model.
    6. 模具制造:模具的主用途是保证批量生产的效率和质量。要经过CNC加工、火花、飞模、省模等工序。
    6. mold manufacturing: the main purpose of the mold is to ensure the efficiency and quality of mass production. CNC process, spark, flying die, die and so on.
    7. EP板制造(次工程样板):次试模后要进行试装来检查模具的制造质量和模型的装配结构是否合理。
    7. EP plate manufacturing (first engineering model): after the first test, the tooling should be tested to check the manufacturing quality of the mold and the assembly structure of the model is reasonable.
    8. FEP板制造(第二次工程样板):主要是检查次改模后产品零件是否按照技术要求更改到位,同时制作装饰样板,并且要对产品的安全性给予确认。
    8. FEP plate manufacturing (second engineering model): mainly to check whether the product after the first modification of the mold in accordance with the technical requirements change in place, while making decorative models, and to confirm the safety of the product.

    9. PP样板(后工程板):放产前后一次给客人确认的样品。

    济南模型公司

    9. PP model (final engineering board): the last sample to be confirmed to the guest before the birth.
    三点保养沙盘模型法
    Three point maintenance sand table model method
    当沙盘模型制作公司把刚完成的沙盘模型交给你的时候,你一定觉得非常理想,外观精美而且是崭新出炉的。要想保持沙盘模型的这种崭新度,那就需要知道基本的沙盘保养方法哦!现在就来跟各位说一说沙盘模型制作保养基本的三个法则。
    When the sandbox model company gives you the newly completed sand table model, you must find it ideal, beautiful and new. To keep this new model of sand table, you need to know the most basic sand table maintenance method! Now let me talk to you about the three basic principles of sand table model making and maintenance.
    沙盘模型制作相信大家都知道破罐子破摔这个道理,也就是所谓的破窗效应,环境中的不良现象如果被放任存在,就会诱使人们仿效,甚至变本加厉。当大家看到有纸屑的公共场所,自己也就随大流乱扔纸屑了,可是当人们处于一个一尘不染的公共场所时也就不好意思乱扔垃圾了。所以呢,沙盘模型也是一样,只有好好保护才能历久弥新,发现坏了的细节要赶紧修补完整,不然只会坏的更快。
    Sand table model making sure everyone knows poguanziposhuai this truth, which is also called the broken window effect, if a bad phenomenon in the environment is allowed, will lead people to follow, and even become aggravated. When you see a public place with scraps of paper, you will follow the trend of littering, but when people are in a spotless public place, you will be tired of littering. So, sand table model is the same, only a good protection to both, found broken details to quickly repair complete, faster or just bad.
    点,尽量把沙盘放在室内展览,不能让沙盘模型暴露在户外,如果长期让模型暴露在户外的话,艳阳高照对模型不好,这就很容易造成模型变形以及褪色问题,加之沙盘材料本身的局限性也使得暴露在户外的模型材质容易发生变化。
    First, try to put the sand on the indoor exhibition, can not let the sand table model exposed in the outdoors, if long-term make models left in the open, the sun is not good for the model, it is easy to cause deformation and discoloration problems, coupled with the limitations of the sand material itself also makes easy to expose in the occurrence of outdoor model material change.
    第二点,对沙盘进行专人管理,起码要有人时不时的盯着,如果遭到人为的破坏,那就功亏一篑了。
    Second, for special management of sand, at least occasionally staring at, if man-made destroyed the work not completed.
    第三点,选择可靠的陕西沙盘模型制作公司,他们会用好的材料,像是染料啊电路板啊等等,好的沙盘在后期保养上自然也就省力很多,不至于提前早早坏掉。
    Third, Shaanxi sand table model selection of reliable production companies, they will use the best materials, such as dye ah ah, circuit board, good maintenance in the sandbox naturally easier, not bad in advance.
    以上文章来源于济南模型公司http://www.jnsymx.com/
    版权所有:济南市槐荫区视野模型设计制作中心 Copyright @ 2011-2012 电话:18660800958  传真:0531-55504101 鲁ICP备11014722号 地址:济南市市中区经十西路6288号1号楼101室 
    网址:http://www.jnsymx.com