您好,欢迎光临山东视野模型有限公司官网!

首页 - 新闻资讯

潍坊模型公司介绍沙盘模型的灯光和电路是怎么制作的?

时间:2020-07-14
阅读量:83
  炫丽的沙盘模型是缺不了灯光的渲染,灯光的设计和制作是沙盘模型制作的一个重要组成部分。而沙盘模型灯光又是缺不了电路的制作,那么,沙盘模型的灯光和电路是怎么制作的呢?下面小编为大家做详细介绍!
  Gorgeous sand table model is indispensable to the rendering of light, and the design and production of light is an important part of sand table model production. And sand table model lighting is indispensable to the production of the circuit, then, how to make the sand table model lighting and circuit? Company's small editor for you to do a detailed introduction!
  沙盘模型的灯光和电路是怎么制作的?
  How to make the light and circuit of sand table model?
  1、沙盘模型灯光制作:
  1. Sand table model lighting production:
  沙盘模型的灯光主要包括有建筑内灯光、环境灯光、庭院灯、路灯等。一般来说,建筑内配不同亮度、不同颜色的灯光,不同功能建筑通过灯光分区。建筑楼体分层亮灯;庭院灯采用造型美观高亮度的观赏灯,考虑观赏性,比例可以适当放大;路灯要选择主干道,道路两侧设置亮的路灯;环境灯光要在绿色丛中、花池中埋置高亮度彩色地灯。
  The lighting of sand table model mainly includes building interior light, environment light, courtyard lamp, street lamp, etc. Generally speaking, the building is equipped with lights of different brightness and color, and different functional buildings are divided by lighting. The building should be lit by layers; the garden lamps should be beautiful and high brightness ornamental lights, and the proportion could be appropriately enlarged considering the ornamental value; the street lamps should be selected on the main road, and the bright street lamps should be set on both sides of the road; the high brightness color floor lamps should be embedded in the green clusters and flower pools.
            潍坊模型公司
  2、沙盘模型电路制作:
  2. Sand table model circuit making:
  沙盘模型中的光照来源于电能。电能来源有很多种,常见的有电池,蓄电池和太阳能电池等。具体的电源选择要根据模型的具体情况来看。一般来说,沙盘模型中的灯光用遥控装置来进行系统控制,遥控器上的每个遥控键控制特定的灯光分区,如:1号键控制建筑灯、2号键控制地灯等。
  The illumination in the sand table model comes from electricity. There are many kinds of power sources, including batteries, batteries and solar cells. The specific power selection should be based on the specific situation of the model. Generally speaking, the light in the sand table model is controlled by remote control device. Each remote control key on the remote controller controls specific light partition, such as building light controlled by key 1 and floor lamp controlled by key 2.
  以上就是关于沙盘模型的灯光和电路是怎么制作的就介绍到这,灯光设计需要依托电源电路,在沙盘模型制作的时候也要预留出安装电源线的孔,一般变压器或电池等设备一般放置于底盘内部,这样比较美观大方。因此,需要在地盘上用电焊机焊出链接电源和灯具的孔。希望本文对您有所帮助,想要了解更多沙盘资讯请继续关注潍坊模型公司http://www.jnsymx.com网站。
  The above is about how the lighting and circuit of the sand table model are made. The lighting design needs to rely on the power circuit. When making the sand table model, the holes for installing the power line should be reserved. Generally, the transformer or battery and other equipment are generally placed inside the chassis, which is more beautiful and generous. Therefore, it is necessary to weld the holes connecting power supply and lamps on the site with electric welding machine. I hope this article will help you. If you want to know more about sand table, please continue to pay attention to Weifang model company http://www.jnsymx.com Website.